U4600 SBS Adhered

From: $270.40

The U4600-SBS is a lightweight rooftop attachment consisting of a 4000 series plate, a factory prepared SBS cover membrane, and separator disk. The U4600 SBS provides a positive, watertight, manufacturer accepted attachment for cold process applied roofing systems.

Category: SKU: U4600-SBS-Adhered


The U4600-SBS is a lightweight rooftop attachment system consisting of a factory prepared SBS cover membrane and separator disk. The U4600-SBS provides a fastened, watertight, warranted attachment for cold process applied roofing systems. Advantages • Extremely strong and lightweight.
• Rapid installation.

U-Anchor Attachment
The U4600-SBS is attached by fastening through the roofing assembly and into the structural decking with 4-12 approved fasteners, as directed by project specific engineering. Depending
on the roofing manufacturer’s requirements, 1 or 2 plies of membrane may be required. The flashing membrane is primed then adhered with cold process adhesive per the roofing manufacturer’s specified methods.
Project-specific data is required to determine the correct type of fastener and number needed to secure each U-Anchor. An ANSI/ SPRI FX-1 Pull Test is recommended to measure the pull-out resistance of fasteners included in the load path, (for example, substrate -> fasteners -> the U-Anchor -> other components.)
Equipment Attachment
To securely mount your rooftop equipment to the U-Anchor, after its installed, the connection nut must be tightened to approximately 20-25 ft.-lbs.
Use a calibrated torque wrench during install to ensure appropriate results are achieved. Refer to product documentation for detailed installation and component requirements.
Results are based on plate performance only.
• Ultimate Load – Shear: Exceeds 10,000 lbs
• Ultimate Load – Tension: Exceeds 10,000 lbs
Tested in accordance with ICC AC467 Individual roof deck assembly tests availa

Product Specifications
• 3/8”-16 x 1.5” Bolt*
• Material Type: 304 Stainless Steel
• Outer Diameter: 14.267”
• Fastener Hole Diameter: 0.234” (12 holes)
• Inner Fastener Hole Pattern: 9.185” (8 holes)
• Outer Fastener Hole Pattern: 13” (4 holes)
• Steel Thickness: 0.118”
• Material Type: Galvanized Steel G90
Cover Membrane
• Manufacturer: Brand or Non-Brand Specific*
• Color: Default White*
• Length: 17.5” (1 Ply)
• Width: 17.5” (1 Ply)
• Thickness: Approx. 130 mils* (1 Ply)


For projects that need ultimate strength, the 4000 Series answers that call. It can bear loads in excess of 10,000 lbs., making it the perfect solution for fall safety protection and suspended access system needs.

This anchor only comes in white online.

We also only allow a quantity of 80 of this anchor to be purchases online.

Please contact us if you need more or a different color.

CLICK HERE to contact us for other colors and options

Additional information

Weight 3.1 lbs
Dimensions 19 × 19 × 6 in

, , , , , , , , , , , ,


, , ,