U3600S SBS Adhered

From: $60.85

The U3600s-SBS is a lightweight rooftop attachment consisting of a 3000s series plate, a factory prepared SBS cover membrane, and separator disk. The U3600s SBS provides a positive, watertight, manufacturer accepted attachment for cold process applied roofing systems.

Category: SKU: U3600s-SBS-Adhered

Description

The U3600-S SBS is a lightweight rooftop attachment system consisting of an U-Anchor 3000s Series plate, flashing cover and separator membrane. The U3600-S SBS provides a fastened, watertight, warranted attachment for mechanically attached hot and cold process applied roofing systems.
Advantages
• Lightweight: 32 oz. (907 grams).
• Fast installation, approximate rate of 12 per man hour.
• Installs on any surface from flat to vertical.
U-Anchor Attachment
The U3600-S SBS is attached by fastening through the roofing assembly and into the structural decking with 2-12 approved fasteners, as directed by project specific engineering. Depending on the roofing manufacturer’s requirements, 1 or 2 plies of membrane may be required. The membrane flashing is adhered in place over the primed roof membrane, followed by the separator membrane, per the roofing manufacturer’s specific methods. Project-specific data is required to determine the correct type of fastener and number needed to secure each U-Anchor. An ANSI/SPRI FX-1 Pull Test is recommended to measure the pull-out
resistance of fasteners included in the load path, (for example,substrate -> fasteners -> the U-Anchor -> other components.)
Equipment Attachment
To securely mount your rooftop equipment to the U-Anchor, after its installed, the connection nut must be tightened to approximately 20-25 ft.-lbs. Use a calibrated torque wrench during install to ensure appropriate
results are achieved. Refer to product documentation for detailed installation and component requirements.

Product Specifications
Bolts
• 3/8”-16 x 1.5” Bolt*
• Material Type: 304 Stainless Steel
Plate
• Dimensions: 8.128” x 5.47”
• Fastener Hole Diameter: 0.265” (12 holes)
• Steel Thickness: 0.047” (1.194mm)
• Material Type: Galvanized Steel G90
Cover Membrane
• Manufacturer: Brand or Non-Brand Specific*
• Color: Default White*
• Length: 14.75”
• Width: 11.75”
• Thickness: Approx. 130 mils*

 

The 3000-S plate is designed for our Snow Retention Solution. With a shorter plate than its sibling, the 3000, the 3000-S also provides the strength of two connection points. The two-bolt plate offers great versatility and customizability depending on your project needs. Snow retention projects are best suited for 3000-S Series.

This anchor only comes in white online.

We also only allow a quantity of 200 of this anchor to be purchases online.

Please contact us if you need more or a different color.

3600-S-SBS-DATA SHEET

CLICK HERE to contact us for other colors and options

Additional information

Weight 1 lbs
Dimensions 18.9 × 13.9 × 1.35 in
Membrane

, , , , , , , , , , , ,

Bolt

, , ,