U3600 APP

From: $78.65

Italian Trulli
The U3600-APP is a lightweight rooftop attachment consisting of a 3000 series plate, a factory prepared APP cover membrane, and separator disk. The U3600-APP provides a positive, watertight, manufacturer accepted attachment for torch applied roofing systems.

DATA SHEET
DRAWINGS
INSTALLATION

 

CSI GUIDE SPECIFICATIONS
Category: SKU: U3600-APP

Description

The U3600 APP is a lightweight rooftop attachment system consisting of an U-Anchor 3000 Series plate, cover and separator membrane. The U3600-APP provides a fastened, watertight, warranted attachment for mechanically attached torch applied roofing systems.
Advantages
• Lightweight: 24 oz. (680 grams).
• Fast installation, approximate rate of 12 per man hour.
• Installs on any surface from flat to vertical.
U-Anchor Attachment
The U3600-APP is attached by lifting the flashing to expose the fastening holes on the plate. Then, fastening through the roofing assembly and into the structural decking with 2-12 approved fasteners, as directed by project specific engineering. Depending on the roofing manufacturer’s requirements, 1 or 2 plies of membrane may be required. The membrane flashing is torched in place over the primed roof membrane, followed by the separator membrane, per the roofing manufacturer’s specific methods. Project-specific data is required to determine the correct type of fastener and number needed to secure each U-Anchor. An ANSI/SPRI FX-1 Pull Test is recommended to measure the pull-out resistance of fasteners included in the load path, (for example, substrate -> fasteners -> the U-Anchor -> other components.)
Equipment Attachment
To securely mount your rooftop equipment to the U-Anchor, after its installed, the connection nut must be tightened to approximately 20-25 ft.-lbs. Use a calibrated torque wrench during install to ensure appropriate
results are achieved. Refer to product documentation for detailed installation and component requirements.

Product Specifications
Bolts
• 3/8”-16 x 1.5” Bolt*
• Material Type: 304 Stainless Steel
Plate
• Dimensions: 11.08” x 5.47”
• Fastener Hole Diameter: 0.265” (12 holes)
• Steel Thickness: 0.047” (1.194mm)
• Material Type: Galvanized Steel G90
Cover Membrane
• Manufacturer: Brand or Non-Brand Specific*
• Color: Default White*
• Length: 17.5” (1 Ply)
• Width: 11.75” (1 Ply)
• Thickness: Approx. 130 mils* (1 Ply)

 

The 3000 Plate is perfect for Pipe Conduit management and other substantial projects of that nature, either roof mounted or wall mounted, demonstrating its adaptability.

This anchor only comes in white online.

We also only allow a quantity of 200 of this anchor to be purchases online.

Please contact us if you need more or a different color.

CLICK HERE to contact us for other colors and options

Additional information

Weight 1 lbs
Dimensions 18.9 × 13.9 × 1.35 in
Membrane

, , , , , , ,

Bolt

, , ,