U3400 KEE

From: $78.65

Italian Trulli
The U3400-KEE is a lightweight rooftop attachment consisting of a 3000 series plate and EPDM cover membrane, which is factory cut and installed in the field. The U3400-KEE is mechanically attached and provides a positive, watertight, manufacturer accepted attachment for fully adhered EPDM single ply membranes.

DATA SHEET
DRAWINGS

 

  • Dimensional Drawing

 

INSTALLATION
CSI GUIDE SPECIFICATIONS
Category: SKU: U3400-KEE

Description

The U3400-KEE is a lightweight rooftop attachment system consisting of an U-Anchor 3000 Series plate, flashing cover and separator membrane. The cover and separator membrane are factory sealed to the top of the plate. The U3400-KEE provides a fastened, watertight, warranted attachment for KEE single-ply membranes.
Advantages
• Extremely strong and lightweight.
• Fast installation, approximate rate of 12 per man hour.
• Installs on any surface from flat to vertical.
U-Anchor Attachment
The U3400-KEE is attached by lifting the flashing to expose the fastening holes on the plate. Then, fastening through the roofing assembly and into the structural decking with 2-12 approved fasteners, as directed by project specific engineering. The membrane cover is then hot air welded around the perimeter to the roof membrane. Project-specific data is required to determine the correct type of fastener and number needed to secure each U-Anchor. An ANSI/SPRI FX-1 Pull Test is recommended to measure the pull-out resistance of fasteners included in the load path, (for example,substrate -> fasteners -> the U-Anchor -> other components.)
Equipment Attachment
To securely mount your rooftop equipment to the U-Anchor, after its installed, the connection nut must be tightened to approximately 20-25 ft.-lbs. Use a calibrated torque wrench during install to ensure appropriate
results are achieved. Refer to product documentation for detailed installation and component requirements.

Product Specifications
Bolts
• 3/8”-16 x 1.5” Bolt*
• Material Type: 304 Stainless Steel
Plate
• Dimensions: 11.08” x 5.47”
• Fastener Hole Diameter: 0.265” (12 holes)
• Steel Thickness: 0.047” (1.194mm)
• Material Type: Galvanized Steel G90
Cover Membrane
• Manufacturer: Brand or Non-Brand Specific*
• Color: Default White*
• Length: 17.5”
• Width: 11.75”
• Thickness: Default 60 mil*
Patents
• Visit www.anchorp.com/patents
Packaging Specifications
• Sold Individually OR Full Box Quantity
• Individual Weight: Approx. 1.4 lb
• Full Box Quantity: 10 units
• Box Weight: Approx. 20 lbs
• Box Dimensions: 19” x 14” x 14”
• Full Pallet Quantity: 30 boxes
• Pallet Dimensions: 48” x 40” x 62”

 

The 3000 Plate is perfect for Pipe Conduit management and other substantial projects of that nature, either roof mounted or wall mounted, demonstrating its adaptability.

This anchor only comes in white online.

We also only allow a quantity of 200 of this anchor to be purchases online.

Please contact us if you need more or a different color.

CLICK HERE to contact us for other colors and options

Additional information

Weight 1 lbs
Dimensions 18.9 × 13.9 × 1.35 in
Membrane

, , , , , ,

Bolt

, , ,