U3400 EPDM

From: $91.40

Italian Trulli
The U3400-EPDM is a lightweight rooftop attachment consisting of a 3000 series plate and EPDM cover membrane, which is factory cut and installed in the field. The U3400-EPDM is mechanically attached and provides a positive, watertight, manufacturer accepted attachment for fully adhered EPDM single ply membranes.

Category: SKU: U3400-EPDM


The U3400-EPDM is a lightweight rooftop attachment system consisting of an U-Anchor 3000 Series plate, flashing cover and separator membrane. The cover membrane is factory prepared and installed in the field. The U3400-EPDM provides a fastened, watertight, warranted attachment for EPDM single-ply membranes.
• Extremely strong and lightweight.
• Fast installation, approximate rate of 12 per man hour.
• Installs on any surface from flat to vertical.
U-Anchor Attachment
The U3400-EPDM is attached by fastening through the roofing assembly and into the structural decking with 2-12 approved fasteners, as directed by project specific engineering. The cover and separator membrane are primed and adhered in place over the cleaned and primed roof membrane and sealed around the perimeter with approved seam sealer. Project-specific data is required to determine the correct type of fastener and number needed to secure each U-Anchor. An ANSI/ SPRI FX-1 Pull Test is recommended to measure the pull-out resistance of fasteners included in the load path, (for example, substrate -> fasteners -> the U-Anchor -> other components.)
Equipment Attachment
To securely mount your rooftop equipment to the U-Anchor, after its installed, the connection nut must be tightened to approximately 20-25 ft.-lbs. Use a calibrated torque wrench during install to ensure appropriate results are achieved. Refer to product documentation for detailed installation and component requirements.

Product Specifications
• 3/8”-16 x 1.5” Bolt*
• Material Type: 304 Stainless Steel
• Dimensions: 11.08” x 5.47”
• Fastener Hole Diameter: 0.265” (12 holes)
• Steel Thickness: 0.047” (1.194mm)
• Material Type: Galvanized Steel G90
Cover Membrane
• Manufacturer: Brand or Non-Brand Specific*
• Color: Default Black*
• Length: 17.5”
• Width: 11.75”
• Thickness: Default 60 mil*
• Visit www.anchorp.com/patents
Packaging Specifications
• Sold Individually OR Full Box Quantity
• Individual Weight: Approx. 1.4 lb
• Full Box Quantity: 10 units
• Box Weight: Approx. 18 lbs
• Box Dimensions: 19” x 13” x 9”
• Full Pallet Quantity: 40 boxes
• Pallet Dimensions: 48” x 40” x 62”

The 3000 Plate is perfect for Pipe Conduit management and other substantial projects of that nature, either roof mounted or wall mounted, demonstrating its adaptability.

This anchor only comes in black online.

We also only allow a quantity of 200 of this anchor to be purchases online.

Please contact us if you need more or a different color.

CLICK HERE to contact us for other colors and options

Additional information

Weight 1 lbs
Dimensions 18.9 × 13.9 × 1.35 in

, , , , ,


, , ,