U2400–EPDM

From: $61.45

Italian Trulli

The U2400-EPDM is a lightweight rooftop attachment consisting of a 2000 series plate and EPDM cover membrane, which is factory cut and installed in the field. The U2400-EPDM is mechanically attached and provides a positive, watertight, manufacturer accepted attachment for fully adhered EPDM single ply membranes.

 

DATA SHEET
DRAWINGS

 

INSTALLATION
CSI GUIDE SPECIFICATIONS

This product is ideal for: Solar Racking & Arrays, HVAC, Heater Vent Stacks, and span a wide range of rooftop equipment securement possibilities, making them a best seller based on project correlation.

 

This anchor only comes in black online.

We also only allow a quantity of 200 of this anchor to be purchases online.

Please contact us if you need more or a different color.

U2400-EPDM Data SheetCLICK HERE to contact us for other colors and options

Category: SKU: U2400–EPDM

Description

Description
The U2400-EPDM is a lightweight rooftop attachment system consisting of a U-Anchor 2000 Series plate and cover membrane. The cover membrane and separator disk are prepared in the factory and installed in the field. The U2400-EPDM provides a fastened, watertight, warranted attachment for EPDM single-ply membranes.

Advantages
• Extremely strong and lightweight.
• Fast installation, approximate rate of 12 per man hour.
• Installs on any surface from flat to vertical.
U-Anchor Attachment
U2400-EPDM is attached by fastening through the roofing assembly and into the structural decking with 2-8 approved fasteners, as directed by project specific engineering. The membrane cover and separator disk are then adhered in place over the cleaned and primed roof membrane and sealed around the perimeter with an approved seam sealer.

Product Specifications
Bolts
• 3/8”-16 x 1.5” Bolt*
• Material Type: 304 Stainless Steel
Plate
• Outer Diameter: 5.5”
• Fastener Hole Diameter: 0.265” (8 holes)
• Fastener Hole Pattern: 4.125” Diameter
• Steel Thickness: 0.047” (1.194mm)
• Material Type: Galvanized Steel G90
Cover Membrane
• Manufacturer: Brand or Non-Brand Specific*
• Color: Default Black*
• Length: 11.75”
• Width: 11.75”
• Thickness: Default 60 mil*

Patents

This product is ideal for: Solar Racking & Arrays, HVAC, Heater Vent Stacks, and span a wide range of rooftop equipment securement possibilities, making them a best seller based on project correlation.

This anchor only comes in black online.

We also only allow a quantity of 200 of this anchor to be purchases online.

Please contact us if you need more or a different color.

 

Additional information

Weight 1.2 lbs
Dimensions 17 × 17 × 5 in
Membrane

, , , , ,

Bolt

, , ,