U2000 TPO

From: $119.85

Italian Trulli Johns Manville only

The U2000-TPO is a lightweight rooftop attachment consisting of a TPO target membrane and 2000 series plate. The plate is factory welded and encapsulated between the target membrane and a matching TPO cover. The U2000-TPO provides a positive, watertight, manufacturer accepted attachment for fully adhered TPO roofs and acts as an effective expansion joint at each attachment point, minimizing the stress to rooftop components.



Category: SKU: U2000-TPO


The U-Anchor 2000-TPO is a lightweight rooftop attachment system consisting of a thermoplastic target membrane and an U-Anchor 2000 series plate. The plate is factory welded to the target membrane and a matching thermoplastic cover membrane is applied over the plate and is welded to the target membrane, encapsulating the plate, followed by a separator disk. The U2000-TPO provides a watertight, warranted attachment solution for TPO roofing systems. The U2000-TPO is ideal for roof assemblies that are difficult to fasten to, and provides additional tax incentives for qualifying rooftop solar installations. Additionally, the U2000-TPO acts as an effective expansion joint at each rooftop attachment point and minimizes stress to roof components.
• Extremely strong and lightweight.
• Fast installation, approximate rate of 12 per man hour.
• Installs on any flat or low slope surface.
U-Anchor Attachment
The U2000-TPO is attached to a roofing system by hot air welding around the perimeter edge consistent with the specified roofing manufacturer’s hot air welding specifications. (Alternative options available for mechanically attached roof assemblies.) Location and spacing of each U2000-TPO is dictated by project specific engineering.
Equipment Attachment
To securely mount your rooftop equipment to the U-Anchor, after its installed, the connection nut must be tightened to approximately 20-25 ft.-lbs. Use a calibrated torque wrench during install to ensure appropriate
results are achieved. Refer to product documentation for detailed installation and component requirements.
Results are based on plate performance only.
• Shear and Tension values vary dependent
upon roof assembly.
• Contact engineering for specific values.
Tested in accordance with ICC AC467 Individual roof deck assembly tests available upon request as application specific results may vary.

Product Specifications
• 3/8”-16 x 1.5” Bolt*
• Material Type: 304 Stainless Steel
Plate (encapsulated between the membranes)
• Outer Diameter: 5.5”
• Steel Thickness: 0.047” (1.194mm)
• Material Type: Galvanized Steel G90
Target Membrane
• Manufacturer: Brand or Non-Brand Specific*
• Color: Default White*
• Length: 15.75”
• Width: 15.75”
• Thickness: Default 60 mil*
• Visit www.anchorp.com/patents
Packaging Specifications
• Sold Individually OR Full Box Quantity
• Individual Weight: Approx. 1.1875 lbs
• Full Box Quantity: 10 units
• Box Weight: Approx. 15 lbs
• Box Dimensions: 17” x 11” x 17”
• Full Pallet Quantity: 30 boxes
• Pallet Dimensions: 48” x 40” x 67”


Best suited for: Solar Racking & Arrays, HVAC, Heater Vent Stacks, and span a wide range of rooftop equipment securement possibilities, making them a best seller based on project correlation.

This anchor only comes in white online.

We also only allow a quantity of 200 of this anchor to be purchases online.

Please contact us if you need more or a different color.

CLICK HERE to contact us for other colors and options


Additional information

Weight 1 lbs
Dimensions 18.9 × 13.9 × 1.35 in

, , , , , ,


, , ,