U1800 Coatings

From: $47.30

The U1800-Coating is a lightweight rooftop attachment consisting of a 1000 series plate and reinforcement fabric. The U1800 includes a factory prepared reinforcement, which is dependent on the type of coating being used, therefore the method of installation may vary.



Category: SKU: U1800-Coatings


The U1800-Coatings is a lightweight rooftop attachment solution consisting of an U-Anchor 1000 Series plate and a flashing cover.The U1800 includes factory prepared cover membrane and separator disk. The reinforcement is dependent on the type of coating being used, and therefore the method of installation may vary.
• Lightweight: 4.4 oz. (125 grams).
• Installs quickly, approximately rate of 12 per man hour.
• Installs on any surface from flat to vertical.
U-Anchor Attachment
The U1800-Coatings is attached by fastening through the roofing assembly and into the structural decking with 2-4 approved fasteners, as directed by project specific engineering. Depending on the roofing manufacturer’s requirements, the reinforcement type may vary, thereby changing the method of installation.Consult the coating manufacturer for proper application instructions.
Project-specific data is required to determine the correct type of fastener and number needed to secure each U-Anchor. An ANSI/SPRI FX-1 Pull Test is recommended to measure the pull-out resistance of fasteners included in the load path, (for example,substrate -> fasteners -> the U-Anchor -> other components.)
Equipment Attachment
To securely mount your rooftop equipment to the U-Anchor, after its installed, the connection nut must be tightened to approximately 20-25 ft.-lbs. Use a calibrated torque wrench during install to ensure appropriate results are achieved. refer to product documentation for detailed installation and component requirements.

Product Specifications
• 3/8”-16 x 1.5” Bolt*
• Material Type: 304 Stainless Steel
• Outer Dimension: 3.625” x 3.625”
• Fastener Hole Diameter: 0.234” (4 holes)
• Fastener Hole Pattern: 3.560” Diameter
• Steel Thickness: 0.039”
• Material Type: Galvanized Steel G90
Reinforcement Fabric
• Manufacturer: Non-Brand Specific*
• Color: Default White*
• Length: 9.75”
• Width: 9.75”
• Visit www.anchorp.com/patents
Packaging Specifications
• Sold Individually OR Full Box Quantity
• Individual Weight: Approx. 0.28 lbs
• Full Box Quantity: 10 units
• Box Weight: Approx. 5 lbs
• Box Dimensions: 13” x 13” x 7”
• Full Pallet Quantity: 50 boxes
• Pallet Dimensions: 48” x 40” x 50”


Best suited for: Lightning Protection, small vents and other light projects are ideal for the 1000 Series. Every U-Anchor is customizable to match the manufacturer, color, and roof type of any project you have.


You can only order 80 at a time for this product. If you need more please call us at 888-571-2131 .

Additional information

Weight 1 lbs
Dimensions 18.9 × 13.9 × 1.35 in

, , ,


Acrylic/Solvent (SEBS) Based, Silicone Based