From: $47.30

The U1400-TPO is a lightweight rooftop attachment consisting of a 1000 series plate and TPO cover membrane, which is factory sealed on top of the plate. The U1400-TPO is mechanically attached and provides a positive, watertight, manufacturer accepted attachment for fully adhered TPO single ply membranes.ns



Category: SKU: U1400-TPO


The U1400-TPO is a lightweight rooftop attachment system consisting of an U-Anchor 1000 Series plate and cover membrane. The cover membrane is factory sealed to the top of the plate with separator disk. The U1400-TPO provides a fastened, watertight, warranted attachment for TPO single-ply membranes.
• Extremely strong and lightweight.
• Fast installation, approximate rate of 12 per man hour.
• Installs on any surface from flat to vertical.
U-Anchor Attachment
The U1400-TPO is attached by fastening through the roofing assembly and into the structural decking with 2-4 approved fasteners, as directed by project specific engineering. The membrane cover is then hot air welded around the perimeter to the roof membrane. After verifying the seam integrity with a probe, seam sealer maybe required per roofing manufacturer’s specifications.
Project-specific data is required to determine the correct type of fastener and number needed to secure each U-Anchor. An ANSI/SPRI FX-1 Pull Test is recommended to measure the pull-out resistance of fasteners included in the load path, (for example, substrate -> fasteners -> the U-Anchor -> other components.)
Equipment Attachment
To securely mount your rooftop equipment to the U-Anchor, after its installed, the connection nut must be tightened to approximately 20-25 ft.-lbs. Use a calibrated torque wrench during install to ensure appropriate results are achieved. Refer to product documentation for detailed installation and component requirements.
Results are based on plate performance only.
• Ultimate Load – Shear: 3,381 lbs
• Ultimate Load – Tension: 2,028 lbs
Tested in accordance with ICC AC467
Individual roof deck assembly tests available upon request as
application specific results may vary.

Product Specifications
• 3/8”-16 x 1.5” Bolt*
• Material Type: 304 Stainless Steel
• Outer Dimension: 3.625” x 3.625”
• Fastener Hole Diameter: 0.234” (4 holes)
• Fastener Hole Pattern: 3.560” Diameter
• Steel Thickness: 0.039”
• Material Type: Galvanized Steel G90
Cover Membrane
• Manufacturer: Brand or Non-Brand Specific*
• Color: Default White*
• Length: 9.75”
• Width: 9.75”
• Thickness: Default 60 mil*
• Visit www.anchorp.com/patents
Packaging Specifications
• Sold Individually OR Full Box Quantity
• Individual Weight: Approx. 0.36 lbs
• Full Box Quantity: 10 units
• Box Weight: Approx. 6 lbs
• Box Dimensions: 13” x 11” x 13”
• Full Pallet Quantity: 50 boxes
• Pallet Dimensions: 48” x 40” x 66”


Best suited for: Lightning Protection, small vents and other light projects are ideal for the 1000 Series. Every U-Anchor is customizable to match the manufacturer, color, and roof type of any project you have

This anchor only comes in white online.

We also only allow a quantity of 200 of this anchor to be purchases online.

Please contact us if you need more or a different color.

CLICK HERE to contact us for other colors and optio

Additional information

Weight 1 lbs
Dimensions 18.9 × 13.9 × 1.35 in

, , ,


, , , , , ,